KissBox TCP/UDP IP control protocol for IO3CC and IO8CC

read more

KissBox TCP/UDP IP control protocol for DMX1TR

read more

Modbus Firmware for IO3CC and IO8CC – Bootloader V5.x

Current version – V4.0 With this firmware, the IO3CC and IO8CC CardCage units can be used with the Modbus communications protocol. Input and Output cards can be controlled over Ethernet. Digital Inputs (DI8DC) Digital Outputs (DO4PR or DO8SK) Analog Inputs (AI8RA) Analog Outputs (AO8DA)   It is possible to use any number of any type… read more

RTP-MIDI Firmware for IO3CC and IO8CC – Bootloader V5.x

Current version – 4.0 MIDI based channel control Controlled by Midi Channel Messages Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Fully compatible with Midi based control systems Bootloader V5.x firmwares require Editor version 14.6. or higher to upload! WARNING The V5 bootloader hardware is not compatible with older bootloader V3.x and… read more

Windows RTP-UMP driver

Version – 2.7.0 This RTP-UMP driver is needed on Windows platforms in order to make RTP-MIDI devices like the KissBox or other computers appear as standard MIDI interfaces in your MIDI applications. The driver works for both 32 and 64 bits versions of Windows, from Win-XP to Win-11. Select the correct version when installing. Note… read more

ARTNET Firmware for IO3CC and IO8CC – Bootloader V5.x

Current version – V8.0 With this firmware, the IO3CC and IO8CC use incoming ArtNet messages to control the output cards. Input cards are used to produce outgoing ArtNet messages. Artnet based channel control DMX offset channel programmable Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Fully compatible with Artnet based lighting control system… read more

Editor for Mac OSX – Version 14.7 – 64 Bit

Version – V14.7 KissBoxes are installed and configured using the Editor software. This tool can also be used to monitor the status of a KissBox, even if the box is being controlled by other software running on either the same or a different machine. This version of the Editor software can be used on Apple… read more

Editor for Windows – Version 14.7

Version – V14.7 KissBoxes are installed and configured using the Editor software. This tool can also be used to monitor the status of a KissBox, even if the box is being controlled by other software running on either the same or a different machine. The Windows version of the Editor software can be used with all… read more

UDP/TCP-IP Firmware for IO3CC and IO8CC – Bootloader V5.x

Current version – V9.1 Simpel datagram based UDP/TCP-IP control Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Polling option Bootloader V5.x firmwares require Editor version 14.6. or higher to upload! WARNING The V5 bootloader hardware is not compatible with older bootloader V3.x and V4.x firmwares. The installation of the wrong firmwares on… read more

UDP/TCP-IP Firmware for RS2TR – Bootloader V5.x

Curent version – V8.1 RS-232, RS-422 & RS-485 ( selectable per port ) Baud rate, Start & Stop bit, # data bits & parity programmable per port Peer-to-Peer Serial data transmission Bootloader V5.x firmwares require Editor version 14.6. or higher to upload! WARNING The V5 bootloader hardware is not compatible with older bootloader V3.x and… read more

RTP and UDP/TCP-IP Firmware for TC2TR – Bootloader V5.x

Curent version – V10.1 Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps RTP – real-time MIDI Windows, Mac OS X and Linux compatible Peer-to-Peer Time-code transmission Bootloader V5.x firmwares require Editor version 14.6. or higher to upload! WARNING The V5 bootloader hardware is not compatible with older bootloader V3.x… read more

ARTNET & UDP/TCP-IP Firmware for DMX1TR – Bootloader V5.x

Current version – V8.1 Artnet KissBox UDP/TCP-IP Protocol Windows, Mac OS X and Linux compatible Multi node DMX distribution Bootloader V5.x firmwares require Editor version 14.6. or higher to upload! WARNING The V5 bootloader hardware is not compatible with older bootloader V3.x and V4.x firmwares. The installation of the wrong firmwares on V5 hardware could… read more

UDP-IP Firmware for MIDI2TR – Bootloader V5.x

Current version – V8.1 Two independent MIDI IN/MIDI OUT ports. Simple UDP-IP control Peer To Peer mode Please note that this firmware can not be used with the CM-MIDI units! Bootloader V5.x firmwares require Editor version 14.6. or higher to upload! WARNING The V5 bootloader hardware is not compatible with older bootloader V3.x and V4.x firmwares.… read more

RTP-MIDI Firmware for MIDI2TR – Bootloader V5.x

Current version – V10.0 Supports the MIDI-RTP standard. No driver required (MAC OSX ), free driver available for Windows. Simple set-up using the Bonjour protocol. Compatible with WiFi-MIDI on iOS devices Multi-session with full merging of up to 8 simultaneous clients. Please note that this firmware can not be used with the CM-MIDI units! Bootloader V5.x… read more

Editor for Windows – Version 14.4

Version – V14.4 KissBoxes are installed and configured using the Editor software. This tool can also be used to monitor the status of a KissBox, even if the box is being controlled by other software running on either the same or a different machine. The Windows version of the Editor software can be used with all… read more

Editor for Mac OSX – Version 14.4 ( 64 Bit )

Version – V14.4 KissBoxes are installed and configured using the Editor software. This tool can also be used to monitor the status of a KissBox, even if the box is being controlled by other software running on either the same or a different machine. This version of the Editor software can be used on Apple… read more

Price List

Download the current price list read more

RTP-MIDI Firmware for CM-MIDI2 – Bootloader V4.x

Current version – V3.1 Warning : This firmware is for the CM-MIDI2 units running Bootloader version 4.o or higher and is NOT compatible with the “End-Of-Life” CM-MIDI units ( goto CM-MIDI firmware page ), or CM-MIDI2 units running Bootloader V3.x.   Supports the MIDI-RTP standard. USB-Midi class compliant No driver required (MAC OSX ), free driver available… read more

Using Modbus-TCP with OpenPLC

read more

Modbus-TCP Usersguide

read more

Modbus Firmware for IO3CC and IO8CC – Bootloader V4.x

Current version – V3.0 With this firmware, the IO3CC and IO8CC CardCage units can be used with the Modbus communications protocol. Input and Output cards can be controlled over Ethernet. Digital Inputs (DI8DC) Digital Outputs (DO4PR or DO8SK) Analog Inputs (AI8RA) Analog Outputs (AO8DA)   It is possible to use any number of any type… read more

RTP-MIDI Firmware for IO3CC and IO8CC – Bootloader V4.x

Current version – 3.0 Bootloader V4.x firmwares require Editor version 13.0.0 or higher to upload! With this firmware, the IO3CC and IO8CC can be used in a MIDI environment. This allows for full control of all the complete range of Input and Output cards trough MIDI soft and hardware devices like musical keyboards and sequencers.… read more

RTP-MIDI Firmware for MIDI2TR – Bootloader V4.x

Current version – V9.0 Supports the MIDI-RTP standard. No driver required (MAC OSX ), free driver available for Windows. Simple set-up using the Bonjour protocol. Compatible with WiFi-MIDI on iOS devices Multi-session with full merging of up to 8 simultaneous clients. Please note that this firmware can not be used with the CM-MIDI units! Bootloader V4.x… read more

ARTNET Firmware for IO3CC and IO8CC – Bootloader V4.x

Current version – V7.0 With this firmware, the IO3CC and IO8CC use incoming ArtNet messages to control the output cards. Input cards are used to produce outgoing ArtNet messages. Artnet based channel control DMX offset channel programmable Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Fully compatible with Artnet based lighting control system… read more

UDP/TCP-IP Firmware for RS2TR – Bootloader V4.x

Curent version – V7.1 RS-232, RS-422 & RS-485 ( selectable per port ) Baud rate, Start & Stop bit, # data bits & parity programmable per port Peer-to-Peer Serial data transmission   Bootloader V4.x firmwares require Editor version 13.0.0 or higher to upload! KissBox CPU versions are related to their boot-loader version and marked accordingly… read more

RTP and UDP/TCP-IP Firmware for TC2TR – Bootloader V4.x

Curent version – V9.0 Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps RTP – real-time MIDI Windows, Mac OS X and Linux compatible Peer-to-Peer Time-code transmission   Bootloader V4.x firmwares require Editor version 13.0.0 or higher to upload! KissBox CPU versions are related to their boot-loader version and marked… read more

ARTNET & UDP/TCP-IP Firmware for DMX1TR – Bootloader V4.x

Current version – V7.0 Artnet KissBox UDP/TCP-IP Protocol Windows, Mac OS X and Linux compatible Multi node DMX distribution   Bootloader V4.x firmwares require Editor version 13.0.0 or higher to upload! KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V4.x for example… read more

UDP/TCP-IP Firmware for IO3CC and IO8CC – Bootloader V4.x

Current version – V7.0 Simpel datagram based UDP/TCP-IP control Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Polling option   Bootloader V4.x firmwares require Editor version 13.0.0 or higher to upload! KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being… read more

UDP-IP Firmware for MIDI2TR – Bootloader V4.x

Current version – V7.0 Two independent MIDI IN/MIDI OUT ports. Simple UDP-IP control Peer To Peer mode   Please note that this firmware can not be used with the CM-MIDI units! Bootloader V4.x firmwares require Editor version 13.0.0 or higher to upload! KissBox CPU versions are related to their boot-loader version and marked accordingly on the… read more

RTP-MIDI Firmware for CM-MIDI2 – Bootloader V3.x

  Current version – V2.1 Warning : This firmware is for the CM-MIDI2 units and is NOT compatible with the “End-Of-Life” CM-MIDI units. ( goto CM-MIDI firmware page )   Supports the MIDI-RTP standard. USB-Midi class compliant No driver required (MAC OSX ), free driver available for Windows. Both USB and RTP-Midi interfaces are recognised as… read more

RTP-MIDI Firmware for IO3CC and IO8CC – Bootloader V3.x

Current version – 2.0 With this firmware, the IO3CC and IO8CC can be used in a MIDI environment. This allows for full control of all the complete range of Input and Output cards trough MIDI soft and hardware devices like musical keyboards and sequencers. More information on the RTP-MIDI protocol standard is available on Wikipedia… read more

UDP/TCP-IP Firmware for RS2TR – Bootloader V3.x

  Curent version – 6.0 RS-232, RS-422 & RS-485 ( selectable per port ) Baud rate, Start & Stop bit, # data bits & parity programmable per port Peer-to-Peer Serial data transmission KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for… read more

UDP-IP Firmware for MIDI2TR – Bootloader V3.x

  Current version – V6.0 Two independent MIDI IN/MIDI OUT ports. Simple UDP-IP control Peer To Peer mode  Please note that this firmware can not be used with the CM-MIDI units! KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example… read more

ARTNET Firmware for IO3CC and IO8CC – Bootloader V3.x

  Current version – 6.0 With this firmware, the IO3CC and IO8CC use incoming ArtNet messages to control the output cards. Input cards are used to produce outgoing ArtNet messages. Artnet based channel control DMX offset channel programmable Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Fully compatible with Artnet based lighting control… read more

RTP-MIDI Firmware for CM-MIDI – Bootloader V3.x

Current version – V2.0 Warning : This firmware is for the “End-Of-Life” CM-MIDI units and is NOT compatible with the new CM-MIDI2 units. ( goto CM-MIDI2 firmware page )   Supports the MIDI-RTP standard. No driver required (MAC OSX ), free driver available for Windows. Simple set-up using the Bonjour protocol. Compatible with WiFi-MIDI on iOS… read more

RTP-MIDI Integration guide for Windows and MacOS

read more

Declaration Of Conformity

This document states our declaration of conformity to the following directives : EMC Directive 89/336/EEC EMC ROHS Directive 2002/95/EC RoHS REACH Regulation (EC) No 1907/2006   read more

Warranty

KissBox B.V. warrants its product and its parts against defects in materials or workmanship for one year from the original ship date. During this period, KissBox B.V. will repair or replace defective parts with new or reconditioned parts at KissBox B.V.’s option, without charge to you. This document contains the complete warranty conditions. Please contact us… read more

RTP-MIDI Integration guide for iOS

read more

General Hardware Manual

read more

Editor Software Manual

read more

Editor for Mac OSX – Version 13.1 – 32 Bit ( Bootloadeer V3 and below )

Version – V13.1 for Bootloader versions V3 and lower KissBoxes are installed and configured using the Editor software. This tool can also be used to monitor the status of a KissBox, even if the box is being controlled by other software running on either the same or a different machine. This version of the Editor… read more

Editor for Windows – Version 13.0 ( Bootloader V3 and below )

Version – V13.0 for Bootloader versions V3 and lower KissBoxes are installed and configured using the Editor software. This tool can also be used to monitor the status of a KissBox, even if the box is being controlled by other software running on either the same or a different machine. The Windows version of the… read more

RTP-X User manual

RTP-X is an hardware expansion module, designed to be installed in hardware synthesizers or any audio systems, in order to make them directly RTP-MIDI compliant. It can be installed in almost any host system, as long as this system has a MIDI 1.0 interface available (with DIN connectors).   This document describes the hardware connection… read more

RTP-MIDI OEM Manual

The KissBox Network CPU is a compact embedded computer board, specially designed for audio / synthesizers / show-control networked applications, based on the KissBox V3 CPU. The OEM RTP-MIDI firmware is designed to turn the V3 CPU into a network processor in charge of handling all lower communication layers and provide directly MIDI and HD… read more

MS1

Single Port 15.4W Power over Ethernet AdapterPSA16U IEEE 802.3af Compliant read more

RTP and UDP/TCP-IP Firmware for TC2TR – Bootloader V3.x – SN below 8323095

  Curent version – 7.0 Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps RTP – real-time MIDI Windows, Mac OS X and Linux compatible Peer-to-Peer Time-code transmission Please note that here have been two versions of TC2TR hardware with Bootloader V3.x. These versions are identifiable by their serial number and… read more

ARTNET & UDP/TCP-IP Firmware for DMX1TR – Bootloader V3.x

Current version – V6.0 Artnet KissBox UDP/TCP-IP Protocol Windows, Mac OS X and Linux compatible Multi node DMX distribution KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware to a KissBox the… read more

UDP/TCP-IP Firmware for IO3CC and IO8CC – Bootloader V3.x

Current version – V6.0 Simpel datagram based UDP/TCP-IP control Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Polling option KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware to… read more

RTP-MIDI Firmware for MIDI2TR – Bootloader V3.x

Current version – V8.0 Supports the MIDI-RTP standard. No driver required (MAC OSX ), free driver available for Windows. Simple set-up using the Bonjour protocol. Compatible with WiFi-MIDI on iOS devices Multi-session with full merging of up to 8 simultaneous clients. Please note that this firmware can not be used with the CM-MIDI units! KissBox CPU… read more

RTP and UDP/TCP-IP Firmware for TC2TR – Bootloader V3.0 – SN below 8323096

Curent version – 6.1 Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps RTP – real-time MIDI Windows, Mac OS X and Linux compatible Peer-to-Peer Time-code transmission Please note that here are two versions of TC2TR hardware. These versions are identifiable by their serial number and both require a different… read more

RS2TR Dimensional Drawing

The file RS2TR_DIM displays the dimensions of the RS2TR unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

CAD Drawings

The .zip file KISSBOX_CAD contains a set of CAD drawings of KissBox products in DWG format. These files can be used “as are” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes  or damages resulting from the use of these drawings. read more

RM19 Dimensional Drawing

The file RM19_DIM displays the dimensions of the RM19 rack-mount DIN rail adapter in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

CVToolbox Dimensional Drawing

The file CVToolbox_DIM displays the dimensions of the CVToolbox unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

CM-MIDI Dimensional Drawing

The file CM-MIDI_DIM displays the dimensions of the CM-MIDI unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

IO8CC Dimensional Drawing

The file IO8CC_DIM displays the dimensions of the IO8CC unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

TC2TR Dimensional Drawing

The file TC2TR_DIM displays the dimensions of the TC2TR unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

DMX1TR Dimensional Drawing

The file DMX1TR_DIM displays the dimensions of the DMX1TR unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

MIDI2TR Dimensional Drawing

The file MIDI2TR_DIM displays the dimensions of the MIDI2TR unit in .pdf  format. This file can be used “as is” in project design and shop drawings. KissBox B.V. can not be held liable for any mistakes or damages resulting from the use of this drawing. read more

UDP/TCP-IP Firmware for RS2TR – Bootloader V3.0

  Curent version – 5.1 RS-232, RS-422 & RS-485 ( selectable per port ) Baud rate, Start & Stop bit, # data bits & parity programmable per port Peer-to-Peer Serial data transmission   KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x… read more

RTP and UDP/TCP-IP Firmware for TC2TR – Bootloader V3.x – SN above 8323095

  Curent version – 5.13 Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps RTP – real-time MIDI Windows, Mac OS X and Linux compatible Peer-to-Peer Time-code transmission Please note that here are two versions of TC2TR hardware. These versions are identifiable by their serial number and both require a… read more

ARTNET Firmware for IO3CC and IO8CC – Bootloader V3.0

  Current version – 5.2 With this firmware, the IO3CC and IO8CC use incoming ArtNet messages to control the output cards. Input cards are used to produce outgoing ArtNet messages. Artnet based channel control DMX offset channel programmable Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Fully compatible with Artnet based lighting control… read more

UDP/TCP-IP Firmware for IO3CC and IO8CC – Bootloader V3.0

Current version – V5.3 Simpel datagram based UDP/TCP-IP control Automatic statuschange notification Adjustable Automatic Release option ( Output Contacts ) Polling option   KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware… read more

ARTNET & UDP/TCP-IP Firmware for DMX1TR – Bootloader V3.0

Current version – V5.1 Artnet KissBox UDP/TCP-IP Protocol Windows, Mac OS X and Linux compatible Multi node DMX distribution   KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware to a KissBox… read more

UDP-IP Firmware for MIDI2TR – Bootloader V3.0

  Current version – V5.10 Two independent MIDI IN/MIDI OUT ports. Simple UDP-IP control Peer To Peer mode    Please note that this firmware can not be used with the CM-MIDI units! KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for… read more

DO8SK Datasheet

read more

DO4PR Datasheet

read more

DI8DC Datasheet

read more

AO8DA Datasheet

read more

AI8RA Datasheet

read more

RTP-MIDI Firmware for MIDI2TR – Bootloader V3.0

Current version – V7.1 Supports the MIDI-RTP standard. No driver required (MAC OSX ), free driver available for Windows. Simple set-up using the Bonjour protocol. Compatible with WiFi-MIDI on iOS devices Multi-session with full merging of up to 8 simultaneous clients.   Please note that this firmware can not be used with the CM-MIDI units! KissBox… read more

VSTizer S16 RTP-MIDI VST Editor/Librarian for Behringer S16 Digital Snake

The VSTizer S16 is a remote control plugin for the Behringer S16 Digital Snake. It allows to control these modules over Ethernet / RTP-MIDI link (since the Ethernet connectors on the S16 do not support IP communication, remote control over network is only possible by RTP-MIDI) It is also able to store 32 different configurations.… read more

VSTizer DX21 RTP-MIDI VST Editor/Librarian for Yamaha DX21 synthesizer

The VSTizer DX21 is complete Editor/Librarian for the DX21 synthesizer. It allows complete parameter editing and full remote control over RTP-MIDI link.Like all VSTizer plugins, they are available as a free bundle plugin for all Kiss-Box RTP-MIDI interface customers. You can easily import in the plugin the numerous banks available in SYSEX format. read more

VSTizer TX81Z RTP-MIDI VST Editor/Librarian for Yamaha TX81Z synthesizer

The VSTizer TX81Z is complete Editor/Librarian for the TX81Z synthesizer. It allows complete parameter editing and full remote control over RTP-MIDI link.Like all VSTizer plugins, they are available as a free bundle plugin for all Kiss-Box RTP-MIDI interface customers. You can easily import in the plugin the numerous banks available in SYSEX format. read more

VSTizer EX800 / Poly800II RTP-MIDI VST Editor/Librarian for Korg EX800 and Poly800Mk2 synthesizers

The EX800 and Poly800II VSTizers are complete Editor/Librarian for the famous EX800 and Poly800Mk2 synthesizers. They allows complete parameter editing and full remote control over RTP-MIDI link.Like all VSTizer plugins, they are available as a free bundle plugin for all Kiss-Box RTP-MIDI interface customers. The different original tapes from Korg have been converted into VST… read more

VSTizer DW8000 RTP-MIDI VST Editor/Librarian for Korg DW8000 synthesizer

The VSTizer DW8000 is a complete Editor/Librarian for the well-known and under-rated DW8000 synthesizer. It allows complete parameter editing and full remote control over RTP-MIDI link. The VSTizer DW8000 is available as a free bundle plugin for all Kiss-Box RTP-MIDI interface customers. The two factory banks from Korg have been converted into VSTizer bank format,… read more

VSTizer DSS1 RTP-MIDI VST Editor/Librarian for Korg DSS-1 synthesizer

The VSTizer DSS-1 is a complete Editor/Librarian for the famous Korg DSS-1 synthesizer. It allows complete parameter editing and full remote control over RTP-MIDI link.It also allows direct sample uploading/downloading from/to the synthesizer (the floppy disk drive is not needed anymore, even to start the DSS-1). The VSTizer DSS-1 is available as a free bundle… read more

VSTizer Basic Virtual RTP-MIDI port for VST hosts

The VSTizer Basic is a virtual RTP-MIDI port compatible with any VST host. It adds RTP-MIDI capabilities to your sequencer / Digital Audio Workstation, without needing any driver to install. It transfers in a completely transparent way all MIDI commands sent by the sequencer to the plugin directly to a remote MIDI device connected to… read more

QConductorM VST plugins

The QConductor EZCC is a set of VST plugins, designed to perform Show Control related operations directly from any VST host, like a DAW or sequencer. read more