Current version – V8.0
With this firmware, the IO3CC and IO8CCÂ use incoming ArtNet messages to control the output cards.
Input cards are used to produce outgoing ArtNet messages.
- Artnet based channel control
- DMX offset channel programmable
- Automatic statuschange notification
- Adjustable Automatic Release option ( Output Contacts )
- Fully compatible with Artnet based lighting control system
Bootloader V5.x firmwares require Editor version 14.6. or higher to upload!
WARNING
The V5 bootloader hardware is not compatible with older bootloader V3.x and V4.x firmwares. The installation of the wrong firmwares on V5 hardware could “brick” the unit. It will have to be returned to the factory for repair. Please check the bootloader version label on the back of the KissBox before attempting a firmware upload.
KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V4.x for example indicates a V4 type CPU. When uploading firmware to a KissBox the Editor firmware wizard will also inform you of the Boot-loader/CPU version of the connected KissBox.
It is important to check that you load the right firmware in the right box. The IO3CC and IO8CC should only be loaded with Firmware specifically meant for it. Using a wrong firmware file will lead to erratic behavior. Accidentally loading an incorrect type of firmware will not physically damage the KissBox, it will however stop functioning. If this has happened, just load the correct firmware for the hardware version you have to render the KissBox operable again.