Curent version – 5.1
- RS-232, RS-422 & RS-485 ( selectable per port )
- Baud rate, Start & Stop bit, # data bits & parity programmable per port
- Peer-to-Peer Serial data transmission
KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware to a KissBox the Editor firmware wizard will also inform you of the Boot-loader/CPU version of the connected KissBox.
It is important to check that you load the right firmware in the right box. The RS2TRÂ should only be loaded with Firmware specifically meant for it. Using a wrong firmware file will lead to erratic behavior. Accidentally loading an incorrect type of firmware will not physically damage the KissBox, it will however stop functioning. If this has happened, just load the correct firmware for the hardware version you have to render the KissBox operable again.
WARNING
The new V3.2 bootloader hardware is not compatible with bootloader V3.0 firmwares. The installation of the wrong firmwares on V3.2 hardware will “brick” the unit. It will have to be returned to the factory for repair.